Safety Instructions; Control Panel - GE WPDH8800 Owner's Manual & Installation Instructions

About the washer control panel.
You can locate your model number on a label on the side of the washer.
WARNING!
Quick Start
If the screen is dark, press the POWER button to "wake up"
the display.
Press the POWER button.
1
Select a wash cycle. (Defaults
2
are set for each wash cycle.
These default settings can be
changed. See Control settings
for more information.)
If you selected a wash cycle
3
other than SPECIALTY CYCLE,
press the START/PAUSE button.
If you selected SPECIALTY CYCLE, choose between Garments,
Bed and Bath, Other Specialty and Basket Clean for your
specific needs before pressing START/PAUSE. See Specialty
Cycles for more information.
Power
1
Press to "wake up" the display. If the display is active, press to put the washer into standby mode.
NOTE: Pressing POWER does not disconnect the appliance from the power supply.
4
To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS before operating this appliance.