HP 3PAR StoreServ 10000 Specifications page 11

QuickSpecs
Configuration
NOTE: The two different controller nodes cannot be mixed within a 10400 system. Care must
be taken to ensure the appropriate upgrade node is purchased while performing a node field
upgrade for an existing 10400 system. The following table indicates the 10400 base
configuration SKUs that correspond to each of the controller nodes available:
10400 Base Configuration SKU
QR584A, QR632A, QR633A, QR632C, QR584C,
QR633C, QW978A
E7W33A, E7W48A
HP 3PAR StoreServ 10000 Disk Adapters
HP 3PAR 10000 4-port 8Gb Fibre Channel Adapter
HP 3PAR 10000 4-port 8Gb Fibre Channel Upgrade Adapter
HP 3PAR StoreServ 10000 Host Adapters
HP 3PAR 10000 4-port 8Gb Fibre Channel Adapter
HP 3PAR 10000 4-port 8Gb Fibre Channel Upgrade Adapter
HP P10000 3PAR 2-port 10Gb Converged Network Adapter Card
HP P10000 3PAR 2-port 10Gb Upgrade Converged Network Adapter Card
HP 3PAR StoreServ 10000 Drive Chassis
HP 3PAR StoreServ 10000 40-disk Drive Chassis
HP 3PAR StoreServ 10000 40-disk Upgrade Drive Chassis
HP 3PAR 10000 40-disk Drive Chassis Rack-mount Kit
HP 3PAR StoreServ 10000 Drives
HP 3PAR SAS HDDs HP 3PAR StoreServ 10000 4x300GB 6G 15K SFF SAS Drive Magazine
HP 3PAR StoreServ 10000 4x450GB 6G 10K SFF SAS Drive Magazine
10400
One (1), two (2) and three (3) pairs of Controller Nodes beyond the base configuration
is supported on the 10800
There are two 10400 Controller Nodes available - one that includes total cache: 32GB
control / 64GB data and another that includes total cache: 64GB control / 128GB data.
The 10800 Controller Nodes includes total cache: 64GB control / 128GB data
The node configurations and base configuration, shown in the section above, have
built-in Gigabit Ethernet ports for management and Remote Copy over IP
Two (2) required per node or four (4) per node pair
Disk Adapters must be ordered in addition to the base configurations and controller
node configurations
QR630A and QR610A enable 10Gb/s iSCSI through a CNA
When ordering QR633C, one QR598A must be ordered for each QR592C ordered
When adding Drive Chassis to a system with QR633C, one QR598A must be ordered for
each QR609C ordered
DA - 14103 Worldwide — Version 19 — January 17, 2014
HP 3PAR StoreServ 10000 Storage
Upgrade Controller Node
QR603C
E7W35A
QR591A
QR608A
QR591A
QR608A
QR630A
QR610A
QR592C
QR609C
QR598A
QW902A
QW903A
Page 11