Technical Specifications - Networking And Communications - HP EliteDesk 800 G1 series Specifications

QuickSpecs

Technical Specifications - Networking and Communications

Intel® I217LM GbE Network Connection
Connector
System Interface
Controller
Memory
Data rates supported
IEEE Compliance
Bus architecture
Data transfer mode
Power requirement
Boot ROM support
Network transfer mode
Network transfer rate
Environmental
Management
Alerting
(integrated)
RJ-45
Integrated on PCA
Intel I217LM GbE platform LAN connect networking controller
24 KB FIFO packet buffer memory
10/100/1000 Mbps
802.1P
802.1Q
802.2
802.3
802.3ab
802.3az
802.3u
PCI Express and SMBus
PCIe-based interface for active state operation (S0 state) and SMBus for host and management
traffic (Sx low power state)
Requires 3.3V and 0.9V or just 3.3V with integrated regulators
Power consumption 0.733 Watts
Yes
Full-duplex
Half-duplex (not supported for the 1000BASE-T transceiver)
10BASE-T (half-duplex) 10 Mbps
10BASE-T (full-duplex) 20 Mbps
100BASE-TX (half-duplex) 100 Mbps
100BASE-TX (full-duplex) 200 Mbps
1000BASE-T (full-duplex) 2000 Mbps
Operating Temperature: 0° to 85° C
Operating Humidity: 60% RH
WOL, auto MDI crossover, PXE, Muti-port teaming, RSS, Advanced cable diagnostic
ASF 2.0 support; AMT 9.0 support
DA - 14653 North America — Version 16 — December 12, 2013
HP EliteDesk 800 G1 Series Business Desktop
Page 45