Table of Contents
Advertisement
Table of Contents
Valet Mode
1 Button Remote Functions
By Firstech, LLC
By Firstech, LLC
2
2
Sending Commands
Active Lock/Arm and Unlock/Disarm
Automatic Transmission Remote Start Function
Anti Grind/Starter Kill
Remote Coding / Programming Routine(s)
4
Programming 1 Button Remotes
5
Remote Start Error Diagnostic
Limited Lifetime Warranty
5
Introduction
Thank you for purchasing a Firstech system for your vehicle. In order to truly enjoy the benefits of this system, we recommend that you thoroughly review the
following manual. Please note that this manual applies to the all Firstech 1 Button Remote Starter systems only. 1 Button remotes offer keyless entry and remote
6
start only. There may also be features listed in this manual that require additional installation or programming before they can become active. If you have any
6
questions, please contact the original place of purchase. For further information you may also contact our customer support center by calling 888-820-3690.
6
9
Warranty Coverage
10
10
11
12
Caution: The Manufacturer’' s warranty will be voided if this product is installed by anyone other than an authorized dealer. For complete warranty
!
details visit www.compustar.com or the last page of this manual. Firstech remotes carry a 1 year warranty from original date of purchase.
Warranty registration can be completed online by visiting www.compustar.com. Please complete the registration form within 10 days of purchase. We no
longer include a mail in warranty registration card with each unit - registration must be done online. To verify that an authorized dealer installed your system,
we highly recommend that you keep a copy of the original proof of purchase, such as the dealer invoice in a safe place.
3
By Firstech, LLC
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 1BR-AM and is the answer not in the manual?
Questions and answers
My remote start will no longer start my car. Goes through all the motions of starting but no start. Lights blink three times indicating receiving signal then pauses and gives 10 blinking lights afterwards
The CompuSTAR 1BR-AM remote start is not starting the car and is showing three blinks followed by ten blinks because there is a remote start error. The three parking light flashes indicate a remote start error occurred. The ten additional blinks likely represent a specific error code that can be diagnosed using the "remote start error diagnostic" section in the manual.
This answer is automatically generated