HP 3500 series Specifications page 54

QuickSpecs
Accessory Product Details
HP X132 10G SFP+ LC SR
Transceiver (J9150A)
A 10-Gigabit transceiver in
SFP+ form-factor that
supports the 10-Gigabit SR
standard, providing 10-
Gigabit connectivity up to
300 m on multimode fiber.
Ports
Connectivity
Physical characteristics
Environment
Electrical characteristics Power consumption
Cabling
Notes
Services
DA - 13282 North America — Version 20 — January 17, 2014
1 LC 10-GbE port (IEEE 802.3ae Type 10Gbase-SR); Duplex: full only
Connector type
Wavelength
Dimensions
Weight
Transceiver form factor
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Altitude
typical
Power consumption
maximum
Cable type:
62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal
content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2
Type A1b or A1a, respectively;
Maximum distance:
2-26m with 62.5 µm multimode cable @ 160 MHz*km
2-33m with 62.5 µm multimode cable @ 200 MHz*km
2-66m with 50 µm multimode cable @ 400 MHz*km
2-82m with 50 µm multimode cable @ 500 MHz*km
2-300m with 50 µm multimode cable @ 2000 MHz*km
Cable length
Fiber type
For fiber patch cords, use Ultra Physical Contact (UPC) surface
termination/polish. Angled Physical Contact (APC) is not recommended.
Refer to the HP website at:
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 3500 and 3500 yl Switch Series
LC
850 nm
2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19
cm)
0.04 lb. (0.02 kg)
SFP+
32°F to 158°F (0°C to 70°C)
0% to 85%, noncondensing
-40°F to 185°F (-40°C to 85°C)
up to 10,000 ft. (3 km)
0.6 W
0.8 W
2-300m
Multi Mode
www.hp.com/networking/services for details on
Page 54