Casio IT-800 Series Hardware Manual page 76

Angle
1D (Code39 10mil (0.25mm))
Pitch 2D Stack type (PDF417 10mil(0.25mm))
angle
2D Matrix type (Aztec 20mil(0.5mm))
1D (Code39 10mil 0.25mm))
Skew 2D Stack type (PDF417 10mil(0.25mm))
angle
2D Matrix type (Aztec 20mil(0.5mm))
Dead zone
1D (Code39 10mil (0.25mm))
2D Stack type (PDF417 10mil(0.25mm))
Tilt angle
2DMatrix type (Aztec 20mil(0.5mm))
Lighting
100 to 80,000Lux
PCS
1D (Code39 10mil (0.25mm))
2D Stacked (PDF417 10mil (0.25mm))
2D Matrix (Maxi Code 35mil (0.889mm))
Viewing angle
V_Angle = 26 degree
H_Angle = 35 degree
Operation temperature
High
Low
Notes:
1. All the specifications in the table are defined under the basic condition. See page 78.
2. A small amount of variation in reading range may occur according to each symbology.
3. All no. of digits are defined using numeric only. With alphanumeric and ASCII characters, no.
of digits of a symbology is defined by the specifications and setting on a barcode print
application software.
4. All "Recommend no. of digits" and "Maximum no. of digits" are reference only. They may
vary according to barcode printing quality, surrounding environment in where scanning
barcode takes place, etc.
5. Scanning barcode will take place in the temperature of -20°C, but, the scanning ability may
deteriorate.
±35 degree
±35 degree
±35 degree
±40 degree
±40 degree
±35 degree
±5 degree
(Pitch, Skew)
360 degree
360 degree
360 degree
0.45 or more
0.45 or more
0.45 or more
50°C
-10°C
76
At 110 mm away from the
IT-800.
At 110 mm away from the
IT-800.
At 110 mm away from the
IT-800.
At 110 mm away from the
IT-800.
At 110 mm away from the
IT-800.
At 110 mm away from the
IT-800.
At 110 mm away from the
IT-800.
At 110 mm away from the
IT-800.
At 110 mm away from the
IT-800.
At 110 mm away from the
IT-800.
5 digits
100 digits
52 digits
See note 5.