Fujitsu PRIMERGY RX300 S7 Manual page 8

A
Rack version for 19'' racks with
No PSU included in Base Unit
Basic unit is without CPU and Memory
For an orderable basic unit one CPU = first CPU and
one memory = first memory has to be selected
Basic unit with
6x 3.5" HDD bays fixed
Basic unit with
2.5" HDD bays expandable
Basic unit with
8x 2.5" HDD bays fixed
Basic unit with
12x 2.5" HDD bays fixed
S26113-F575-E10
450W PSU module platinum
1st or 2nd PSU for redundancy
94% efficiency (platinum)
uses hot plug PSU slot
min. 1 / max. 2x per system
S26113-F574-E99 *
Power Supply Dummy
must be ordered if 1x PSU only
occupies one bay for
hot plug power supply
max. 1x per system
*For order completeness only
Not shown in system architect
Version > V9.2
S26361-F3552-E1
TPM Module
Trusted Platform Module on Motherboard
Use according to import restrictions
max. 1x per system
Be aware of import restrictions!
Loose delivery for later
integration possible for customer.
B
Cables included in basic unit
Connections
1.
SATA DVD
2. SAS cables to HDDs
3.
1x cable for SAS signaling
Note: Rack Mounting kit and Power Cord for RX300S7 is not included in the basic unit and
has to be configured separately
S26361-K1373-V101
S26361-K1373-V401
S26361-K1373-V201
S26361-K1373-V301
S26113-F574-E10
800W PSU module platinum
1st or 2nd PSU for redundancy
94% efficiency (platinum)
uses hot plug PSU slot
min. 1 / max. 2x per system
For later redundancy upgrade the following kit is available:
One 450W power supply module hot plug
no power cable included!!!
One 800W power supply module hot plug
no power cable included!!!
One 800W -48V DC PSU hot plug
no power cable included!!!
Please order appropriate power cord additionally:
Powercord for rack, 4m, grey, IEC320 C13->C14 connector
Power Cord USA / Canada, 1.8m, grey
Power Cord -48V DC, 4m, black
Fujitsu PRIMERGY Server
System configurator and order-information guide
PRIMERGY RX300 S7
Cable



Basic unit with 2.5" HDD bays is modular expand-
able with various modules for backup devices
integration or up to 16x 2.5" HDDs.
Details and pictures see Section Va:
Possible configuration options for basic units
Full redundancy cannot be guaranteed for a max.
config. with e.g. two 135W CPUs with 450W PSUs.
In this case SysArch will generate a warning and
Power Safeguard will throttle CPUs
in case of a PSU failure.
So, power consumption will be limited to 450W.
S26113-F609-E10
800W PSU module -48V DC gold
1st or 2nd PSU for redundancy
92% efficiency (gold)
uses hot plug PSU slot
min. 1 / max. 2x per system
S26361-F3552-L1
TPM Module add-on kit
for later integration (loose delivery)
Trusted Platform Module on Motherboard
Use according to import restrictions
max. 1x per system
Status 2013-12-30
PRIMERGY RX300 S7



S26113-F575-L10
S26113-F574-L10
S26113-F609-L10
T26139-Y1968-L10
T26139-Y1742-L10
T26139-Y4024-L10
 SAS

SATA
8 of 31