Fujitsu PRIMERGY RX300 S7 Manual page 11

D
IV
Section
Graphics Controller integrated in iRMC S3 (integrated Remote Management Controller):
1600x1200x16bpp 60Hz, 1280x1024x16bpp 60Hz, 1024x768x32bpp 75Hz, 800x600x32bpp 85Hz, 640x480x32bpp 85Hz
(1280x1024x24bpp 60Hz only possible if local monitor or remote video redirection is off)
S26361-F2571-E26
Optional Front-VGA
for Onboard Controller only
consists of internal cable and
front VGA connector
max. 1x per system
The hight end optional NVIDIA NVS300 graphic card offers dual head operation and fully 3D video support.
The cables for either two times DVI-I or VGA (cable kit) connections are part of the delievery.
Optional Front-VGA S26361-F2571-E26 cannot be ordered if NVS300 is required.
Remote Video direction via iRMC must be disabled.
This PCIe-x1 card can also be installed in any PCIe-x4, x8 or x16 slot.
max. 1x Only one card per server is allowed.
S26361-F2748-E637
PY VGA LP card 256MB PCI-e x1
NVIDIA NVS300
512 MB PCIe-x1
Connectors: 1x LFH 59
cable kit for 2x DVI or 2x VGA
cable kits included
Dual head + professional 2-D + 3-D
supported for Windows OS
native driver support for Linux OS
low profile bracket
max. 1x per system
E
Graphics
Fujitsu PRIMERGY Server
System configurator and order-information guide
PRIMERGY RX300 S7
PY VGA card must be installed in slot 4 (x8 wired x8)
Status 2013-12-30
S26361-F2748-L637
PY VGA LP card 512MB PCI-e x1
for loose delivery
11 of 31