Fujitsu PRIMERGY RX300 S7 Manual page 3

Configuration diagram PRIMERGY RX300 S7
System unit ( I )
with up to 6x 3.5" Hard disk drives
Motherboard
Memory CPU1
( Channel A + B + C )
Bank 1 (4 Modules)
Bank 2 (4 Modules)
Bank 3 (4 Modules)
Memory CPU2
( Channel D + E + F)
Bank 1 (4 Modules)
Bank 2 (4 Modules)
Bank 3 (4 Modules)
Memory (III )
rear side
1. PSU
2. PSU
Redundant power
supply option
Modular RAID
Support
Low-profile extension slots for:
SCSI Controller for backup( VII )
SAS Disk Array ( VIII )
Communication/Network ( IX )
Miscellaneous ( X )
Slot 6 PCIe-3 x16, 390mm @ CPU2
Slot 5 PCIe-3 x16, 390mm @ CPU2
Slot 4 PCIe-3 x8, max. 390mm @ CPU1
Possibility to install PCIe x16 cards
Slot 3 PCIe-3 x8, max. 390mm @ CPU1
Slot 2 PCIe-3 x8, max. 312mm @ CPU1
Slot 1 PCIe-3 x8, max. 168mm @ CPU1 white colored
Dedicated for modular on-board LAN-Controller
Slot 7 PCIe-3 x8, max. 168mm @ CPU1
Internal slot for modular RAID-Controller
Key:
Included in basic unit
One CPU, one memory per CPU and one PSU has to be selected for an orderable basic unit.
Xeon DP
Xeon DP
Processor ( II )
Fan 1 - Fan 5
Redundant Fans
are standard!
Raid Card for IME, Raid 0 / 1E
Raid Card for Raid 5
Option
Fujitsu PRIMERGY Server
System configurator and order-information guide
PRIMERGY RX300 S7
front side
Bay for LocalView LCD
LSD
2 USB
Air channel VGA, LAN
Frontpanel
Bay for 5,25"x 0,5" SATA-BR
or DVD-ROM/RW
Accessible drives ( V )
Needs space for 2
hard disk drives!
3.5"x1,6"
Backup drive option
Hard disk drives ( VI )
3.5" SAS/SATA
3.5"x1" SAS or SATA
3.5"x1" SAS or SATA
3.5"x1" SAS or SATA
3.5"x1" SAS or SATA
3.5"x1" SAS or SATA
3.5"x1" SAS or SATA
Status 2013-12-30
3 of 31