DPX500BT/DPX300U
17-1. Registering the PIN code
By operating the Bluetooth device, specify the PIN code necessary for registering this
unit.
1. Press the [Ú] button.
"BT MODE" appears and enter the Bluetooth mode.
2. Use the [Control knob] to select "SETTINGS"
EDIT".
For how to use the [Control knob], refer to
3. Input the PIN code
Operation type
Selection of numbers
Movement to the next digit
Deletion of the last digit
Transmission of PIN code
If "COMPLETED" appears and registration is complete.
Exit the Bluetooth mode.
Press the [Ú] button.
Notes on PIN code input
By default, "0000" is specified.
A PIN code can be specified with up to eight digits.
17. Bluetooth settings (DPX500BT)
17-1. Registering the PIN code
>
"DETAILED SET"
<3-3. How to select the
Operation
Turn the [Control knob].
Press the [
].
Press the [
].
Press the [Control knob].
>
"PIN CODE
item>.