Selecting The Bluetooth Device You Wish To Connect - Kenwood DPX500BT User Manual

DPX500BT/DPX300U

14-3. Selecting the Bluetooth device you wish to connect

14-3. Selecting the Bluetooth device you wish to connect
When two or more Bluetooth devices have already been registered, you need to select
the Bluetooth device you wish to use.
1. Press the [Ú] button.
"BT MODE" appears and enter the Bluetooth mode.
2. Use the [Control knob] to select "SETTINGS"
(to select the cell-phone) or "AUDIO SELECT" (to select the audio player).
For how to use the [Control knob], refer to
"(name)" appears.
3. Use the [Control knob] to select an Bluetooth device.
*
' (name)' or '-(name)' appears.
*
" ": The selected Bluetooth device is busy.
"-": The selected Bluetooth device is on standby.
" " (blank): The Bluetooth device is deselected.
Exit the Bluetooth mode.
Press the [Ú] button.
When no device can be selected
If a cell-phone is already selected, deselect it, and then select a different one.
If you cannot select a device using the audio player, connect the device with the
audio player.
14. Registering a Bluetooth (DPX500BT)
> "PAIRING"
<3-3. How to select the
> "PHONE SELECT"
item>.