Configurations - Star Micronics TUP900 Integration Manual

Configurations

The TUP900 can be configured in many different ways. Each of these
configurations offers unique features that can be invaluable to many
applications.
Mounting of the TUP900 is simple using the multiple mounting holes
built-in to the base of the unit.
The standard configuration for the TUP992 has the control box
mounted underneath the unit. This configuration minimizes the overall
width of the unit and places the control panel facing towards the paper
outlet at the front of the unit.
Here, the control box has been moved to the side of the unit. While this
configuration does increase the overall width of the unit, it also puts the
control panel facing upwards. This configuration can work well in
applications with only rear or side access to the printer.
Adding the RHU-T900 large paper roll holder unit allows for use of a
larger paper roll up to 10 inches in diameter. While this configuration
does offer the largest paper roll it also requires a rather deep installation.
Mounting the RHU-T900 underneath the TUP992 allows for up to an 8-
inch diameter paper roll while still maintaining a relatively low horizontal
depth of the enclosure.