TMP900
Mounting from the Printer Front
Use the U-shaped grooves (a, b, c and d) and the hole (e) shown in figure
8.2A to fasten the printer mechanism. Also, A and B are for positioning
the printer mechanism.
Fig. 8.2A
Mounting from the Printer Rear
Use the four holes (f) shown in fig 8.2B to fasten the printer mechanism.
Also, A and B are for positioning the printer mechanism. Use self-
tapping screws to fasten the printer mechanism. Control the tightening
torque to avoid damaging the threads of the screws when tightening.
Fig. 8.2B