Create Raid - Foxconn Z75A-S User Manual

RAID CONFIGURATION

Create RAID 1

1. Select "1.Create RAID Volume" from the main menu and press <Enter>.
2. In "Name" item, you can input a device name for the RAID1 system and press <Enter> to
apply it. Here, we name it as TryRAID1 to replace the default Volume0.
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select
3. In "RAID Level" item, you can use Up or Down arrow key to make a selection. Select RAID1
(Mirror) and press <Enter>.
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select
74
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5 Intel(R) Rapid Storage Technology - Uption ROM - 11.0.0.1339
Copyright(C) 2003-11 Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Sync:
Enter a unique volume name that has no special characters and is
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5 Intel(R) Rapid Storage Technology - Uption ROM - 11.0.0.1339
Copyright(C) 2003-11 Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Sync:
RAID1: Mirrors data (redundancy).
]
Volume0
TryRAID1
RAID0(Stripe)
Select Disks
128KB
0.0 GB
N/A
Create Volume
[ HELP ]
16 characters or less.
]
TryRAID1
RAID1(Mirror)
RAID1(Mirror)
Select Disks
N/A
0.0 GB
N/A
Create Volume
[ HELP ]