Pc Health Status - Foxconn Renaissance User Manual

PC Health status

CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
PC Health Status
H/W Health Function
CPU Temperature
System Temperature
CPU Fan Speed
System Fan1 Speed
System Fan2 Speed
System Fan3 Speed
VCore
VDIMM
VNB
+5V
+12V
VTT
VCC
VSB
↑↓←→:Move Enter:Select
PC Health status
► H/W Health Function
This item is used to enable hardware health monitoring device.
► CPU/System Temperature
The CPU/System temperature are automatically detected and displayed by the system.
► CPU Fan/System Fan1/System Fan2/System Fan3 Speed
The CPU fan/System fan1/System fan2/ System fan3 speed are automatically detected and
displayed by the system.
► VCore/VDIMM//VNB/+ 5V/+12V/VTT/VCC/VSB
The current voltages are automatically detected and displayed by the system.
► CPU FAN Mode Setting
This item is used to select CPU fan configuration mode. You can select "Manual Mode by
RPM/DutyCycle" to set the CPU fan speed manually. Default value is "Auto Fan by RPM".
► Temperature Limit of Highest/Second/Third/Lowest
This option is used to set CPU temperature grade from 0
reaches a higher grade, CPU fan will go faster. When reaches a lower grade, CPU fan will go
slower. You can modify the grade value by pressing <+>/<-> key, or input it directly.
► Fan Highest/Second/Third/Fourth/Lowest Setting
This option is used to set the CPU fan speed according to different CPU temperature grade. You
can modify the setting by pressing <+>/<-> key, or input a value directly. The illustration in next
page can help you to know about the relationship between temperature and fan speed.
► System FAN Mode Setting
This item is used to select system fan configuration mode.
► Temperature Limit of Highest/Second/Third/Lowest
This option is used to set system temperature grade from 0
temperature reaches a higher grade, system fan will go faster. When reaches a lower grade,
system fan will go slower. You can modify the grade value by pressing <+>/<-> key, or input it
directly.
PC Health Status
[Enabled] [Enabled]
:84 C/183 C
o o
:42 C/107 C
o o
:2127 RPM
:N/A
:N/A
:N/A
:1.192 V (+0.00V)
:1.481 V
:1.088 V
:5.183 V
:11.792 V
:1.691 V (+0.00V)
:3.360 V
:3.360 V
+/-/:Value F10:Save ESC:Exit
F9:Optimized Defaults
C to 127
o
34
Help Item
Enables Hardware
Health Monitoring
Device.
F1:General Help
C. When CPU temperature
o
C to 127 C. When system
o o