6. Use Up or Down arrow key to select the desired strip size when entering "strip
Size" menu. The default value is 64K. Press <Enter>.
Intel(R) Matrix Storage Manager option ROM v8.5.0.1030 ICH10R/D0 wRAID5
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
7. In "Capacity" item, use the default value, and press <Enter>. The default value is
twice that of the smallest hard disk size, that is, 232.9GB * 2 = 465.8GB.
8. Select "Create Volume" and press <Enter>. A warning message will appear :
Press <Y> to create the volume and return to the main menu.
Intel(R) Matrix Storage Manager option ROM v8.5.0.1030 ICH10R/D0 wRAID5
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
1. Create RAID Volume
2. Delete RAID Volume
RAID Volume :
ID
Name
0
TryRAID5
Physical Disks:
Port Drive Model
0
WDC WD2500JS-60N WD-WCANKC865380 232.9GB
2
Maxtor 6L250S0
4
ST3320620SV
5
ST3300831AS
Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
[
CREATE VOLUME MENU
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
The following are typical values:
[↑↓]-Change
[TAB]-Next
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume ? (Y/N) :
Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
1. Create RAID Volume
[
DISK/VOLUME INFORMATION
Level
RAID5(Parity)
Serial #
L50SKP4G
9QF4YJGQ
3NF02XH2
[↑↓]-Select
]
TryRAID5
RAID5(Parity)
Select Disks
64KB
64KB
465.8 GB
Create Volume
[
HELP
]
RAID0 - 128KB
RAID10 - 64KB
RAID5 - 64KB
[ESC]-Previous Menu
[
MAIN MENU
]
3. Reset Disks to Non-RAID
4. Exit
]
Stripe Size
64KB 465.8GB
Size
232.9GB
298.1GB
279.5GB
[ESC]-Exit
[ENTER]-Select Menu
93
[ENTER]-Select
*
= Data is Encrypted
Status
Bootable
Normal
Yes
Type/Status(Vol ID)
Non-RAID Disk
Member Disk(0)
Member Disk(0)
Member Disk(0)