3-2 Configure - System
This page lets you set the backup BIOS location and change different skin of the Fox LiveUpdate
utility.
Click here
Determine if the FOX LiveUpdate can
auto run when the system starts up
3-3 Configure - Advance
This page lets you select to flash BIOS / Boot Block and clear CMOS. If you choose Flash Boot
Block, it means BIOS is not protective, and you must make sure the flash process is continuous
and without any interruption.
Click here
!
We recommend that you should better keep the default setting unchanged to avoid any
damage.
Apply the changes
Apply the changes
Reset to default value
65
Set the location of
download files or
auto backup BIOS
Select different skin
of the software
Reset to default value
Select which BIOS ROM
to flash(Only available to
Motherboard with backup
BIOS ROM )
Select to flash Boot Block
Select to clear CMOS