Foxconn P35A Series User Manual page 116

4. Connect an auxiliary power source from the power supply to the graphics card.
Connect to monitor
5. Connect the DMS-59 cable to the DVI monitor connector and two graphics cards
that you install as shown.
6. Power on your computer and get into OS (Windows
Windows XP Professional 64-bit Edition).
®
7. Install Microsoft's .NET Framework Version 1.1. Without it, The ATI Catalyst
Control Center can not launch properly.
8. Install the ATI graphics card drivers and restart your computer. Then you will find
"ATI Catalyst Control Center" on your desktop.
XP 32-bit with SP2 or
®
109
Power
Extension
Cable
Connect to master
graphics card DMS
connector
Connect to slave
graphics card DVI
connector
TM