Foxconn P35A Series User Manual page 44

power related chips. Other devices might include temperature, fan, or voltage sensors; and lid
switches. PCI add-in cards may connect to an SMBus segment.
► Onboard 1394 Control
This item is used to enable or disable the 1394 devices. In some motherboards, 1394 is
optional and need a specific hardware chip to fulfill its functions.
► JMicron e-SATA&IDE
This item is used to enable/disable the Parallel ATA IDE (PIDE) drive controller on the
motherboard.
► Realtek Gigabit LAN
This item is used to enable/disable the gigabit Ethernet controller on the motherboard.
► SLP_S4# Min. Assertion Width
SLP_S4# is a signal of Southern Bridge (ICH) chip. It is for power plane control. This signal
shuts power to all non-critical systems when in the S4 (Suspend to Disk) or S5 (Soft Off) state.
It can also be used to control the DRAM power.
This item is used to set the SLP_S4# Min. Assertion Width. The available values are :
[4 to 5 seconds]; [3 to 4 seconds]; [2 to 3 seconds]; [1 to 2 seconds](Default).
37