Foxconn P35A Series User Manual page 27

This chapter tells how to change system settings through
the BIOS Setup menus. Detailed descriptions of the BIOS
parameters are also provided.
You have to run the Setup Program when the following cases
occur :
1. An error message appears on the screen during the system
2. You want to change the default CMOS settings.
This chapter includes the following information:
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Since BIOS could be updated some other times, the BIOS information described
in this manual is for reference only. We do not guarantee the content of this
manual will remain consistent with the newly released BIOS at any given time in
the future. Please visit our support website for updated manual if it is available.
Power-On Self-Test (POST) process.
Enter BIOS Setup
Main Menu
Standard BIOS Features
Fox Central Control Unit
Boot Configuration Features
Advanced BIOS Features
PCI/PNP Resource Management
Power Management Features
Hardware Health Configure
BIOS Security Features
Load Optimal Defaults
Load FailSafe Defaults
Save Changes and Exit
Discard Changes and Exit