Warranty - Celestron 44330 Instruction Manual

Your microscope and digital camera are precision optical instruments and should be treated with
care at all times. Follow these care and maintenance suggestions and your microscope will need
very little maintenance throughout its lifetime.
When you are done using your microscope, remove any specimens or objects left on the
stage.
Turn off the illuminator when you are done using the microscope.
If you will not be using your microscope for a long period of time, remove the batteries
from the illuminator.
Always place the dust cap on the eyepiece or on the camera sensor when not in use or
when being stored.
Store the microscope in a dry and clean place.
Be very careful if using your microscope in direct sun light to prevent damage to the
microscope or your eyes.
Never point the sensor on the camera towards the sun or the camera can be damaged and
cease working.
When moving your microscope, carry it by the "arm" with one hand.
Clean the outside surfaces with a moist cloth.
Never clean optical surfaces with cloth or paper towels as they can scratch optical
surfaces easily.
Blow off dust with a camel's hair brush or air blower off optical surfaces.
To clean fingerprints off of optical surfaces, use a lens cleaning agent and lens tissue
available at most photo outlets and when cleaning do not rub in circles as this may cause
sleeks or scratches to occur.
Never disassemble or clean internal optical surfaces. This should be done by qualified
technicians at the factory or other authorized repair facilities.
Do not disassemble or take apart the digital camera or damage can occur.
When handling glass specimen slides, use care as the edges can be sharp.

Warranty

Your microscope has a two year limited warranty. Please see the Celestron website for
detailed information on all Celestron microscopes at www.celestron.com.
FCC Statement
This device complies with Part 15 of FCC Rules. Operation is subject to the
following two conditions:
1.
2.
2835 Columbia St.
Torrance, California 90503 U.S.A.
www.celestron.com
Care, Maintenance, and Warranty
This device may not cause harmful interference, and
This device must accept any interference received, including interference
that may cause undesired operation.
RoHS
Printed in China 10-09