Power Supply - Salora ELITE 2 Instruction Manual

POWER SUPPLY

Mains operation
Check if the mains voltage on the type plate (at the bottom of the device) corresponds to your local
mains supply. If not, consult your dealer or service organization.
Insert the power cord into the AC socket on the side of the device.
1.
2. Plug the mains plug into the mains socket.
Caution:
In order to disconnect the device from the mains completely, the mains plug should be removed from the
mains socket completely.
Battery operation (Remote Control)
1. Open the battery compartment at the back of the remote control by pulling out the cover..
2. Insert two batteries (2 x 1.5V, Type R03 / UM4 / AAA size) with the correct polarity as shown in the
battery compartment.
3. Replace the cover.
4. If the remote is not to be used for any extended period of time, it is recommended that the batteries
are removed.
Caution:
Do not expose the batteries to excessive heat such as sunshine, fire or the like.
Remove the batteries from the device when they will not be used for a long period of time.
Notes:
Batteries should not be disposed of by incineration and with household waste. Disposable batteries
should be taken to a suitable recycling centre if possible.
6