Super Io Configuration - Foxconn D70S-P User Manual

BIOS SETUP

Super IO Configuration

Main
Super IO Configuration
IT8728 Super IO Chip
▶ Serial Port 1 Configuration
▶ Serial Port 2 Configuration
▶ Parallel Port Configuration
Serial Port 1 Configuration
► Serial Port
This item is used to enable or disable the serial port (COM).
► Device Settings
This item shows the resource assigned to the serial port.
► Change Settings
This item is used to select an optimal settings for Super IO device.
Serial Port 2 Configuration
► Serial Port
This item is used to enable or disable the serial port (COM).
► Device Settings
This item shows the resource assigned to the serial port.
► Change Settings
This item is used to select an optimal settings for Super IO device.
Parallel Port Configuration
► Parallel Port
This item is used to enable or disable the parallel port (LPT/LPTE).
► Device Settings
This item shows the resource assigned to the serial port.
► Change Settings
This item is used to select an optimal settings for Super IO device.
► Device Mode
This item is used to change the printer port mode.
26
f-center Advanced Boot
Version 2.15.1236. Copyright (C) 2013 American Megatrends, Inc.
Power Health Security
Set Parameters of
Serial Port 1 (COMA)
IT8728
→ ←: Select Screen
↑ ↓/Click: Select Item
Enter/Dbl Click: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Save&exit