Integrated Peripherals - Foxconn 720AL Series User Manual

Integrated Peripherals

► OnChip IDE Devices
► MCP SATA Mode
► OnBoard Devices
► SuperIO Devices
► USB Devices
↑↓→←:Move Enter:Select
► OnChip IDE Devices / MCP SATA Mode / OnBoard Devices / SuperIO Devices / USB
Devices
Press [Enter] to go to each submenu.
OnChip IDE Devices
OnChip IDE Channel
IDE DMA Transfer Access
SATA Controller
↑↓→←:Move Enter:Select
► OnChip IDE Channel
This option is used to enable/disable function of IDE drives connected to the PATA interface.
► IDE DMA Transfer Access
[Disabled] : to disable DMA transfers for all IDE drives. They will revert to PIO mode transfers.
[Enabled] : to enable DMA transfers for all IDE drives. The proper DMA mode will be detected
at boot-up. If the drive does not support DMA transfers, then it will use PIO mode instead.
► SATA Controller
This option is used to enable/disable function of SATA drives connected to the SATA ports.
Phoenix - AwardBIOS CMOS Setup Utility
Integrated Peripherals
[Press Enter] Press Enter
[Press Enter]
[Press Enter]
[Press Enter]
[Press Enter]
+/-/PU/PD:Value
F5: Previous Values
Phoenix - AwardBIOS CMOS Setup Utility
OnChip IDE Devices
[Enabled] Enabled
[Enabled]
[Enabled]
+/-/PU/PD:Value
F5: Previous Values
32
Item Help
Menu Level ►
F10:Save ESC:Exit F1:General Help
F7: Optimized Defaults
Item Help
Menu Level ►
F10:Save ESC:Exit F1:General Help
F7: Optimized Defaults