Download Print this page

ADTRAN Quintum Tenor AS Installation Manual page 19

Advertisement

25. To complete the changes, select Confirm/OK and then select the submit changes button.
Enabling CNG Tone Detection for Faxing
By default, a Quintum gateway will not detect CNG tones used for faxing unless the call is directed at a
fax service. In order to receive faxes when a call is answered by a standard service (not a fax service), you
must create a file and upload it to the gateway via FTP.
To enable CNG detection
1. Open notepad or another text editor.
2. Put in the following line: enableCNGdetection 1
3. Save the file as var_config.cfg.
4. From your Windows PC select Start > All Programs > Accessories > Command Prompt. The
Command Prompt window is displayed.
5. Use the CD command to change to the directory on your PC in which you saved the
var_config.cfg file.
6. Type ftp followed by the IP address of the unit. Press Enter.
7. Login with the username and password. The default for both is admin.
8. Use the CD command to change to the cfg directory (this is the directory on the Tenor into which
you will copy the var_config.cfg file). Depending upon the product type and software revision,
the directory structure you see in your Tenor VoIP device may be different.
9. Type bin <Enter>.
10. Type put var_config.cfg <Enter>
11. Restart the gateway from the Tenor Configuration Manager in Tools > Reboot Tenor.
Configuring the UC Server
After you add the gateway to your network, the UC server must be configured to handle incoming and
outgoing phone calls. For outgoing calls you must add: a SIP gateway, a dial plan entry to route calls out
through the gateway, and a toll restriction entry to allow those calls. For incoming calls you must add a
UC server identity that can answer incoming calls from the gateway. These instructions are for release 4.1
of the UC server.
Adding a Trunk Identity
1. Go to Identities.
2. Right-click the right panel and select New Identity.
3. In the first page of the Wizard, select an Attendant identity. Make sure that the Identity is
associated with the Admin profile.
19

Advertisement

loading