Nokia RM-696 Service Manual page 17

31) Unscrew the Torx+ size 5 screw. Do not use it
again. Discard it.
33) Lift up the ENGINE BOARD from the bottom side
of the phone. Be careful not to damage the
connector between the ENGINE BOARD and the
PLASTIC BODY.
35) Unscrew the two screws of the IHF SPEAKER FLEX
with a Phillips size 00 screwdriver.
17
32) Carefully lever up the ENGINE BOARD with the SS-
93 from the bottom side of the phone.
34) Carefully remove the ENGINE BOARD to direction
shown.
36) Pull out and flip open the IHF SPEAKER FLEX with
the tweezers.
Confidential | Copyright © 2011 Nokia | All rights reserved
Nokia N9 (RM-696)
L1L2 Service Manual
Version 1.0