Using The Remote Control - Bosch EHP 6.5 AA Operation Manual

USING THE REMOTE CONTROL

LOADING BATTERIES
Use two size-AAA (R03) batteries.
1
Remove the remote control cover.
2
Insert batteries, making sure the (+) and
(-) polarities are correctly a lign ed.
• The display indicates "AM 6:00" when batteries
are properly installed.
3
Reinstall the cover.
NOTE:
• The battery life is approximately one year in normal
use.
• When you replace the batteries, always change both
batteries, and make sure they are the same type.
• If the remote control does not operate properly after
replacing the batteries, take out the batteries and
reinstall them again after 30 seconds.
• If you will not be using the unit for a long time, remove
the batteries from the remote control.
SET CURRENT CLOCK TIME
There are two clock modes: 12-hour mode and 24-hour
mode.
Example:5 o'clock in the afternoon
Clock Display
12-hour mode PM 5:00
24-hour mode 17:00
1
To set to the 12-hour mode, press the
CLOCK button once.
To set to the 24-hour mode, press the
CLOCK button twice.
2
Press the TIME ADVANCE or REVERSE
button to set the current time.
• Keep the button pressed to advance or reverse
the time display quickly.
HOW TO USE THE REMOTE CONTROL
Point the remote control towards the unit's signal
receiver window and press the desired button. The unit
generates a beep when it receives the signal.
• Make sure there is no object between the remote
• The signal effective distance is 7m.
CAUTION:
• Do not expose the receiver window to direct sunlight.
• Use of certain fluorescent lamp in the same room
• Do not leave the remote control in direct sunlight or
• The current time cannot be set when the timer is
Remote
control cover
3
NOTE:
• The current time cannot be set when the timer is
GB-4
control and the unit.
This may adversely affect its operation.
may interfere with transmission of the signal.
near a heater. Protect the unit and remote control
from moisture and shock.
operating.
Press the SET/C button.
• The colon (:) blinks to indicate that the clock is
functioning.
operating.
2
3
1