Maintenance - Bosch EHP 6.5 AA Operation Manual

Split air/air heat pump
Table of Contents

Advertisement

Available languages
  • EN

Available languages

MAINTENANCE

BEFORE PERFORMING MAINTENANCE
Be sure to turn off the circuit breaker before performing
any maintenance.
1
Turn off the unit.
2
Wait 15 seconds or more after the open
panel is completely closed, and turn off
the circuit breaker.
CLEANING THE FILTERS
The air filters should be cleaned every two weeks.
1
Turn off the unit.
2
Remove the filters.
1
Lift the filter cover.
2
Push the air filters up slightly to unlock them.
3
Pull the air filters down to remove them.
Filter cover
1
2
3
3
Take off the air purifying filters from the
air filters.
4
Clean the filters.
Use a vacuum cleaner to remove dust. If the
filters are dirty, wash them with warm water and
a mild detergent. Dry filters in the shade before
reinstalling.
5
Reinstall the air purifying filters.
6
Reinstall the filters.
1 Reinstall the filters in the original positions.
2 Close the filter cover.
2
1
CLEANING THE UNIT AND THE REMOTE
CONTROL
• Wipe them with a soft cloth.
• Do not directly splash or pour water on them. It can
cause electrical shock or equipment damage.
• Do not use hot water, thinner, abrasive powders or
strong solvents.
REMOVING THE OPEN PANEL
The open panel can be removed for cleaning.
1
Push the release button and open the
lower part of the open panel.
2
Lift the open panel up slightly and
remove it.
Open panel
ATTACHMENT
1
Hook both tabs on the shaft.
There is a shaft on each end of the unit.
2
Close the open panel.
Push the arrow-marked points on the open
panel until it clicks.
1
2
After attachment, be sure to close the open panel
firmly.
Acceptable
Open panel
GB-13
1
Release
2
button
Tab
Shaft
Unacceptable

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents