Indicators - Casio XJ-M140 Setup Manual

XJ-M_Setup_03_e.fm 17 ページ ２０１１年２月７日 月曜日 午後５時４４分
Indicators keep you informed about the current operational status of the projector. The following shows
what the indicators look like when operation is normal.
When the indicators
appear like this:
POWER/
LIGHT TEMP
STANDBY
Amber Amber Amber
Amber
Green Amber Amber
Green
Amber
Green Green
: Lit : Flashing
When a warning message appears on the projection screen, or when the POWER, TEMP, and LIGHT
indicators are lit or flashing in a pattern other than those shown above, it means that a projector error
has occurred. For details about indicators and warning messages, see the User's Guide on the
CD-ROM that comes with the projector.

Indicators

You have just plugged the AC power cord into a power outlet. Wait until
the projector enters the standby state (see below) before trying to turn on
power.
Standby state: The AC power cord is plugged in and the projector is in
standby.
Projector is warming up after being turned on.
Projector is on and standing by for use.
Projector is performing internal power down processes.
"On (Auto)" or "On (Manual)" is selected for the projector's Eco Mode
setting.
: Unlit
E-17
It means this: