Dialing From The Contacts List; Speed Dialing; Plus Code Dialing; Abbreviated Dialing - Sanyo Innuendo User Manual

Dialing From the Contacts List

1.
From standby mode, touch
2.
Select the entry you want to call.
3.
Touch to dial the entry's default phone number.
– or –
To dial another number from the same entry, select the
name and touch , and then select a number and touch
.
Plus (+) Code Dialing
When placing international calls, use Plus Code Dialing to
automatically enter the international access code for your location
(for example, 011 for international calls made from the U.S.).
1.
Touch and hold to display " + " on your phone screen.
2.
Enter the country code and phone number, and then touch
. (The phone automatically prepends the access code for
international dialing, followed by the country code and phone
number.)
> Contacts .

Speed Dialing

You can store up to 98 numbers in your phone's speed dial
memory to make contacting friends and family easier.
You must assign a speed dial number to the existing phone
number beforehand. See "Assigning Speed Dial Numbers" on
page 59.
To use speed dial for locations 2-9:
From standby mode, press and hold the appropriate key for
approximately two seconds.
To use speed dial for locations 10-99:
From standby mode, enter a two-digit speed dial number,
and then touch .
The display confirms that the number has been dialed when it
shows "Connecting..."

Abbreviated Dialing

Abbreviated Dialing is similar to speed dialing. You can use either
of the following abbreviated dialing features.
Contacts Match – Retrieve any number saved in your Contacts
by entering four or more digits of any part of the number.
2A. Phone Basics 21