D-Link DSL-2544N User Manual page 59

Section 3 – Web Configuration
LACL
Choose MAINTENANCE > Access Controls > LACL. The page shown as the
figure appears on the right. This page allows you to enable or disable LAN
management services. For example, if the Telnet service is enabled on port 23,
the remote host can access the router by Telnet through port 23.
Click Submit to apply the settings.
Note: If you disable HTTP service, you cannot access the configuration page of
the device any more.
Remote Access Control
Choose MAINTENANCE > Access Controls > Remote Access Control. The
page shown as the figure appears on the right. This page allows you to enable or
disable WAN management services.
D-Link DSL-2544N User Manual 57