Section 3 – Web Configuration
This chapter describes how to use Web-based management of the DSL router, which allows you to configure and control all of DSL router features
and system parameters in a user-friendly GUI.
Configuring IP Address of the Network Card
Configure TCP/IP properties of your network card to Obtain an IP address automatically from modem, or set the IP address of the computer with
the same network mask of the modem.
For example, if the IP address of Router is 192.168.1.1/255.255.255.0, you can set the IP address of the computer to 192.168.1.x/255.255.255.0.
The range for x is from 2 to 254.
The following description is a detail "How-To" user guide and is prepared for first time users.
Step 1
Open
the
to http://192.168.1.1.
Step 2
The Login page is shown as the figure appears on the right. Select admin
from the drop-down list of username and enter the password.
The password is admin.
D-Link DSL-2544N User Manual
Web Configuration
Accessing the Router
Internet
Explorer
(IE)
browser,
and
then
go
14