Table of Contents
Advertisement
QUICKSTART GUIDE
Note
QS–50
To Load the Switch settings file select Settings > Product Setup > Communications >
Ethernet Switch > Ethernet Switch Settings File > Transfer Settings File.
Click on the Transfer Settings File option.
The following window will pop-up, prompting you to select the location and file to be
loaded.
Once Open option is selected on the above window another pop-up window will appear as
shown below indicating setting file transfer is in progress.
If the Settings File transfer was successful, the window below will appear.
.
The switch will automatically reboot after a successful Settings File transfer
UR SWITCH MODULE – QUICKSTART GUIDE
Advertisement
Table of Contents
