Using the High-Speed Charger Unit
The optional DT-820CHGE High-Speed Charger Unit provides high-speed charging of a
lithium-ion battery pack (which is not loaded in the Data Collector).
1 Charge indicator
2 Release lever
3 AC terminal
Charging a Battery Pack
Plug the AC adaptor into an electrical outlet.
Plug the AC adaptor cord into the AC
connector on the side of the High-Speed
Indicates the charge status of the lithium-ion battery pack.
Off: Not charging Red: Charging Flashing Red: Defective battery pack
Green: Charging complete Flashing Green: Temperature outside of allowable
charging range (Charging will resume with a return to normal temperature).
Pull the release lever forward when removing the battery pack from the High-
Speed Charger Unit.
For connection of the AC adaptor.