Table of Contents
Advertisement
General Guide
• Front
• Left side
4
7
• Bottom
7
1
Reader port
2
Read indicator
3
LCD screen and touch panel
4
Stroke keys
5
RS-232C connector (inside cap)
6
Reset button (inside cap)
7
Wrist strap hook
8
Laser warning label
9
Speaker
10 Back-up battery compartment
11 Main battery compartment
12 Main battery compartment lock
13 Charger/AC terminal
14 Infrared port
15 Touch panel stylus
• Right side
1
2
3
4
15
14
13
Emits a laser for bar code reading.
Indicates the status of the read operation: green for a successful read, red
when the read is no good.
Displays various data when a program is being run (LCD screen). Areas on
the screen can touched with the finger or supplied stylus to perform various
key operations (touch panel). Pressing a key inputs the alpha character or
punctuation marked on it.
A total of 28 keys are provided to turn power on and off, to trigger bar code
reading, and for other operations.
Allows connection of other devices for system expansion.
Use a paper clip or other thin object to press the RESET button located
inside the hole.
Hook for installing the wrist strap.
Class 1 laser warning label.
Outputs operation confirmation tones. Take care to avoid blocking the
speaker holes and reducing output sound volume. Never insert any thin,
pointed object into the speaker holes. Doing so can cause malfunction.
Holds memory backup lithium battery.
Holds main batteries.
Locks main battery compartment cover in place. Data Collector power does
not turn on if the battery compartment cover lock is not in the LOCK
position.
This terminal receives power when the Data Collector is attached to an
optional Optical Communication Unit.
This port is for contact-less infrared data communication with another
DT-810/DT-800 unit or an optional Optical Communication Unit.
Use this stylus for touch panel key input.
• Back
5
6
8
9
10
11
12
13
14
E-15
Advertisement
Table of Contents
