Restoring The Network Settings To Factory Default - Brother MFC-885CW Quick Setup Manual

For Network Users
Restoring the network
3
settings to factory default
To restore all network settings of the internal
Print/Scan server to factory default, please follow the
steps below.
1
Make sure the machine is not operating, then
disconnect all the cables from the machine
(except power cable).
2
Press Menu.
3
Press a or b to choose LAN.
Press OK.
4
Press a or b to choose Factory Reset.
Press OK.
5
Press 1 to choose Yes.
6
Press 1 to choose Yes.
7
The machine will restart, re-connect cables
once this is complete.
54