Brother MFC-885CW Quick Setup Manual page 52

STEP 2
Installing the Driver & Software
Note
• For Mac OS
®
Mac OS X 10.2.4 or greater. (For the latest
information for Mac OS
http://solutions.brother.com)
• Make sure there are no memory cards or a USB
Flash memory drive inserted into the media drives
or USB direct interface at the front of the machine.
11
Turn on your Macintosh
12
Put the supplied CD-ROM into your CD-ROM
drive.
13
Double-click the Start Here OSX icon to install.
14
Choose Wireless Network Connection, and
then click Next.
15
Click on the Checked and confirmed check
box, and then click Next.
Follow the on-screen instructions.
50
®
X 10.2.0 to 10.2.3 users, upgrade to
®
X, visit
®
.
Please wait, it will take a few seconds for the
software to install. After the installation, click
Restart to finish installing the software.
16
The Brother software will search for the Brother
device. During this time the following screen
will appear.
Note
• If the machine is configured for your network,
choose the machine from the list, and then click
OK. This window will not appear if there is only
one machine connected on the network, it will be
chosen automatically. Go to step 17.
• If this screen appears click OK.
Enter a name for your Macintosh
Display Name up to 15 characters long and click
OK. Go to step 17.
• If you want to use the machine's Scan key to scan
over the network you must check the Register
your computer with the "Scan To" functions
on the machine box.
• The name you enter will appear on the machine's
LCD when you press the Scan key and choose a
scan option. (For more information, see Network
Scanning in the Software User's Guide on the
CD-ROM.)
®
Macintosh
®
in