Setting The Tray Use For Copy Mode - Brother MFC-8420 User Manual

Setting the Tray Use for Copy mode

If your MFC is a MFC-8420 without the optional tray #2, you can
skip this setting.
MFC-8420
The default setting of Auto allows *
Tray #2 when paper is out in Tray #1 or *
document will fit best on the paper in Tray #2.
1
Menu
Press
2
Press
Only , Tray#2 Only , or Auto .
3
Set
Press .
4
Stop/Exit
Press
MFC-8820D
The default setting of Auto allows *
Tray #2 or the MP tray when paper is out in Tray #1 or and *
the size of the document will fit best on the paper in Tray #2.
1
Menu
Press
2
Press
Tray#1 Only , MP Only , or
Auto .
—OR—
If you have the optional paper tray.
Press
Tray#1 Only , Tray#2 Only , MP
Only , or Auto .
3
Set
Press .
4
Stop/Exit
Press
*1 Copies will automatically be printed from Tray #2 only if the
Paper Size setting for Tray #2 is the same as Tray #1.
*2 When using the ADF, copies will automatically be printed
from Tray #2 if the Paper Size setting for Tray #2 is different than
Tray #1 and this paper size is more suitable for the scanned
original.
1 7
, , .
or to select Tray#1
.
1 7
, , .
or to select
or to select
.
1
your MFC to choose the optional
2
when the size of the
17.Tray Use: Copy
▲
Tray#1 Only
Tray#2 Only
▼
Auto
Select
1
your MFC to choose the optional
17.Tray Use: Copy
▲
Tray#1 Only
MP Only
▼
Auto
Select
17.Tray Use: Copy
▲
Tray#1 Only
Tray#2 Only
▼
MP Only
Select
GETTING STARTED 4 - 13
▲▼
& Set
2
when
▲▼
& Set
▲▼
& Set