Operating; Before Use; After Use; After Recharging - Conair HC318DWXCSC Instructions Manual

2. This appliance should not be used by,
on, or near children or individuals with
certain disabilities.
3. Use this appliance only for its intended
purpose as described in this manual. Do not
use attachments not recommended by the
manufacturer.
extension cord to operate this appliance.
4. Never operate this appliance if it has a
damaged cord or plug, or if it is not working
properly, if it has been dropped or
damaged, or dropped into water. Return the
appliance to a service center for examination
and repair.
5. Keep the cord away from heated surfaces.
6. Never drop or insert any object into any
opening on this appliance.
7. Do not place appliance on any surface
while it is operating.
8. Do not use this appliance with a
damaged or broken comb or with teeth
missing from the blades as injury may occur.
9. Do not use outdoors or operate where
aerosol (spray) products are being used or
where oxygen is being administered.
10. Never operate the appliance with the air
openings blocks or while on a soft surface,
such as a bed or couch, where the air
openings may be blocked. Keep the air
openings free of lint, hair, and the like.
11. Always attach plug to appliance first,
then to outlet. To disconnect, turn all
controls to "OFF" then remove plug from
outlet.
12. Avoid skin contact with moving blades.
13. When using the appliance with its cord,
be mindful of tangles or kinks in the cord. If
the cord does become tangled during use,
turn the unit off and strighten cord before
operating again.
Do not use
SAVE THESE
INSTRUCTIONS

OPERATING

an
INSTRUCTIONS
FOR RECHARGEABLE
Your new Conair Haircut Kit has everything
you need to achieve professional haircuts
at home. Its powerful D.C. motor clipper
with High Stainless Steel blades for long
lasting cutting precision, features a new 5-
position adjustamatic taper control. Plus,
Turbo button for more cutting power.
Whatever hair length you set the lever for,
the clipper will automatically cut all hair in
that section at the same desired length.
This appliance is intended for household
use. Use on Alternating Current (120V 60
hertz) only.
1. Before use, the clipper must be fully
charged for 16 hours.
2. After use, turn the switch to "Off"
position. Recharge batteries by connecting
the charging jack into the receptacle at the
end of the clipper and plugging the adapter
unit into the electrical outlet. The charging
indicator lamp will light up to indicate that
charging has begun.
3. After recharging, store in a dry place,
away from small children.
4. Do not wrap cord around the clipper.
APPLICATION