Connecting Devices To The Server - Fujitsu PRIMERGY TX300 S7 Operating Manual

Hardware installation
5.4

Connecting devices to the server

The connectors for external devices are on the front and rear of the server. The
additional connectors available on your server depend on the expansion cards
installed. For further information refer to the "PRIMERGY TX300 S7⁄ RX350 S7
Server Upgrade and Maintenance Manual".
Figure 2: Connection panel on the rear
1 Video connector (blue)
2 Management LAN connector
3 Standard LAN connector (LAN 2)
* The serial interface COM1 can be used as the standard interface or for
communication with iRMC S3.
The corresponding indicators are explained in section
page 71.
I
Some of the devices connected require special software (e.g. drivers)
(see documentation for the connected device).
Ê Connect the devices.
54
4 Shared LAN connector (LAN 1)
5 Serial connector COM1*
(turquoise)
6 4 USB connectors (black)
Operating Manual
"Rear of server" on
TX300 S7 / RX350 S7