Fujitsu PRIMERGY TX300 S7 Operating Manual page 55

One optional video connector (1), one optional Front LAN connector (2) and two
additional USB connectors (3) are located on the front of the server
Figure 3: Front side connectors
I
If components with large power requirements (e.g. external USB hard
disk drives) are connected simultaneously, these USB connectors may
be switched off.
Connecting the keyboard, mouse and monitor
Ê Connect the monitor, the keyboard and the mouse to the standard ports of
the server (see figure
Ê Connect the power cable of the monitor to a grounded mains outlet of the in-
house mains and/or to the mains socket strip of the rack.
V
CAUTION!
The rated current for the monitor is indicated on the technical data label
on the monitor or in the operating manual for the monitor.
TX300 S7 / RX350 S7
2 on page 54).
Operating Manual
Hardware installation
(figure 3):
55