How To Change The Eds Settings - Compuprint 3056 Operator's Manual

Page Length 11inch, 5.5inch, 8.5inch, 11/3inch, 11/4inch, 70/6inch,
12inch
Skip Perf. Invalid, Valid
Auto Tear Off Auto, Manual
Pin Broken Invalid, 1-12pin, 13-24pin
Reservation
Reservation
Zero Style Normal, Slashed
Reservation
Interface Parallel, Serial, USB, Auto, LAN
Strobe Timing Fall Edge, Rise Edge
Font Roman, Sans serif, Courier, Prestige, Script, OCR-B,
OCR-A, Orator, Orator-S
Line Spacing 1/6inch, 1/8inch, 2/15inch
Reservation
Char Pitch 10CPI, 12CPI, 15CPI, 17CPI, 20CPI, Proportional
Quiet Mode Invalid, Valid
Data Length 8bit, 7bit
Protocol DTR, Xon/Xoff
Parity None, Odd, Even
Baud Rate 9600, 19200, 4800, 2400, 1200, 600,38400
Code Page PC437, Italic, PC850, PC860, PC863, PC865, PC858,
GREEK 737, TURKISH
International U.S.A, France, Germany, U.K, Denmark, Sweden, Italy,
Character Set
Spain, Japan，Norway，Denmark2，Spain2，Latin
Americ，Korea,Ireland， Legal

How to Change the EDS Settings

Follow the steps below to enter into EDS setting mode and change the printer's
default power-on parameters.
1. Make sure the paper is loaded, and the printer is switched off. Hold down
the Shift button and Font button simultaneously while turning on the printer,
and release buttons after the print head moves. The Printer prints current
EDS setting if the paper is loaded. Otherwise the printer directly enters into
EDS setting mode.
21