The Montigo 36SR clearances to combustible materials are 0" -Use of any component part not manufactured or approved by back, 1" sides, 0" floor and 4" top. The Montigo 36SR must not be Montigo in combination with a Montigo fireplace system.
Page 3
HEARTH EXTENSION INSTALLING THE GAS LINE The gas line must be installed before finishing the Montigo 36SR If there is a combustible floor construction in front of the fireplace, fireplace. The gas control valve (which is mounted behind the a hearth extension is recommended to protect it. For the hearth removable grille at the bottom of the unit), is connected to the gas extension recomend you project a minimum of 6"...
Pilot Adjustment Cap faulty wire connection. Pressure Tap FIGURE 5. GAS CONTROL VALVE If your Montigo 36SR still does not operate correctly, consult your dealer or the manufacturer. PILOT BURNER ADJUSTMENT All service and repairs should be performed by a qualified agency 1.
Page 5
INSTALLATION OF GLASS DOORS and adjusting door into square. There are two door kits available for the Montigo 36SR. Bifold c) Doors may be adjusted front to back by simply turning screw, glass doors (Model # M28BD) or twin pane Glass doors...
Page 6
Canadian Heating Products Inc. warrants the Montigo 36SR Decorative Gas Appliance to be free from defects in materials and workmanship at the time of manufacture. On the Montigo 36SR there is a ten-year warranty on the firebox and its components, a five-year warranty on the main burner, pilot burner, and culturedoak logs, as well as a one-year warranty on the gas control valve and bifold glass doors.
Need help?
Do you have a question about the 36SR and is the answer not in the manual?
Questions and answers