Advertisement
ZIS420NX
GE Monogram
Dimensions and Installation Information (in inches)
Advance Planning for Built-In Custom Side-by-Side Refrigerators
Use this page to determine door swing
interaction with adjacent cabinets
or countertops.
Top View
130° Door Swing
(Factory setting)
Scale 1:1
IMPORTANT NOTE –
FOR DISPENSER MODELS
Dispenser models are supplied with
two dispenser trims, one to fit framed
panels and one for overlay panels.
Dispenser trim fit to the custom panel
depends on correct
panel thickness. Framed panels
must be 1/4" nominal. Overlay panels
should be constructed as shown
to accomplish a total
1.100" thickness.
For answers to your Monogram,
®
or GE
appliance questions, visit our website
at ge.com or call GE Answer Center
800.626.2000.
®
42" Built-In Side-by-Side Refrigerator
Refrigerator
®
™
GE Profile
®
service,
Frameless Cabinets: The case trim overlaps
cabinets at the top and sides. Therefore,
frameless cabinets may require filler strips
to prevent interference with cabinet door
swing. The opening must allow for filler strips.
23-7/8" From
Rear of
Refrigerator
1"
Case
3/4"
Trim
1/2"
1/4"
1-1/4"
1/4"
Door
Specification Revised 11/08
2"
3"
1-3/4"
2-3/4"
1-1/2"
2-1/2"
2-1/4"
1/2"
3/4"
1"
1-1/4"
3/4" Overlay
Panel
(Nominal Size)
1/4"
1/2"
3/4"
1"
Listed by
Underwriters
Laboratories
110166
Advertisement
