Connecting The Foot Control; Connecting To The Power Supply - Viking Scandinavia 300 User Manual

Learn your Scandinavia 300
Connecting the foot
control
Among the accessories you will fi nd
the foot control cord and the main
cord.
1. Place the foot control on its
narrow side. Fit the plug into the
socket inside the foot control
compartment.
2. Push it fi rmly to make sure it
is properly connected. This
ope ra tion is only necessary the
very fi rst time you are going to
use the machine.
3. To correctly guide foot control
cord, place it into the slot, see
picture.
Note: Before plugging in, check to
ensure that the foot control is of
type "FR4".
Connecting to the power
supply
1. Connect the foot control cord to
the fi rst socket on the lower right
side of the machine.
2. Connect the main cord to the back
socket on the lower right side of
the machine.
3. When you press the power
switch, both the machine and the
light are turned on.
For the USA and Canada
Husqvarna Viking Scandinavia 300 has a polarized plug (one blade wider than the
other). To reduce the risk of electric shock, this plug is intended to fi t in a polarized
outlet only one way. If the plug does not fi t fully in the outlet, reverse the plug. If
it still does not fi t, contact a qualifi ed electrician to install the proper outlet. Do not
modify the plug in any way.
4
3 2
1