Accessories; Spool Pin - Viking Scandinavia 300 User Manual

Learn your Scandinavia 300

Accessories

You will fi nd a number of
accessories included with your
sewing machine. Learn to use them
on the following pages of this User's
Guide.

Spool pin

The machine has spool pins suitable
for all types of thread. The main
spool pin (a) is horizontal - the
thread reels off the stationary spool.
Place the spool so that the thread
reels counter-clockwise.
d
a
b
c
There are two spool holders on
the spool pin. With narrow thread
spools, the small holder (b) is placed
in front of the thread. If you use
large thread spools, the large holder
(c) is placed in front of the thread.
Slide the correct size spool holder
in place so the fl at side is pressed
fi rmly against the spool, with no
space between spool holder and
spool.
There is also a separate vertical
spool pin (d) to be attached onto
the machine. The fi ngers on the
extra spool pin fi t into the two holes
to the right of the fi xed spool pin.
Push downward to snap in place.
The large spool holder (c) is placed
under the thread. This spool pin is
c
used when winding a bobbin from
a second spool of thread or for a
second spool when sewing with a
d
twin needle.
5