Connection To Electric Outlet; Presser Foot Pressure Control - Viking Turissa Operating & Service Manual

A. Plug cord into foot control.
I
c
B. Attach plug to machine.
C. Plug cord into wall outlet.
A
To turn light on or off, press button located on
face plate. The light bulb is located inside the
face plate. To remove the bulb, unscrew the
bulb through the opening at the bottom of the
face plate.
The pressure control for the presser bar is lo
cated on top of the machine on the left side.
To change the pressure on the presser foot,
press down on the outer ring. The inner section
will move up. You now have no pressure on the
j
—
presser foot. As you push down on the inner
section you will increase the pressure. Loose
pressure on the presser foot is used mostly for
sewing on certain types of stretch fabric such
as sweater fabric. Tight pressure on the presser
foot is used for sewing girdle fabrics.
'I
ii
1'
4