Viking Scandinavia 300 User Manual page 29

7. The machine stops automatically
when it is time to change thread
color. The Infodisplay indicates
which thread color change you
have reached by a fl ashing
number next to the thread spool
. A fl ashing number indicates
the fi rst stitch of the "new" thread
color. The number stops fl ashing
when you begin to sew.
8. Once thread is changed, start
sewing again. The machine stops
for cutting the thread tail and
at the next thread color change
etc, until the embroidery is
completed.
During the stitching, as the
embroidery hoop moves to dif fe rent
places within the embroidery, jump
stitches are sewn. Trim these stitches
as you sew, i.e. when the machine
stops for thread color change.
In most cases the embroidery is
sewn over the jump stitches, but in
some cases a part of the thread can
be visible and diffi cult to trim later.
If the upper thread breaks while
sewing, the machine stops and
gives a signal. The symbol
fl ashing on the display. Rethread the
machine.
Go back a few stitches using the
button and restart. The symbol
goes out.
The machine also stops when the
thread spool runs out. When this
occurs, simply re-thead the top
thread. Go back a few stitches past
the point where the spool thread
ran out, using the
start and the embroidery will be
completed.
If the bobbin thread runs out, touch
to move the hoop and give
enough space around the bobbin
area to change the bobbin. Wind and
replace the bobbin. Touch
and the hoop moves back to where
you stopped embroidering. Go back
a few stitches using the
Re-start and the embroidery will be
completed.
At any time during the embroidery
stitching, check how much bobbin
thread is left, touch
embroidery arm goes to park
position. Touch
embroidery arm back to stitch
position and pull any exess upper
thread back.
Hint: When bobbin winding with
the embroidery unit connected,
thread the machine as described at
is
page 8 - "Bobbin winding direct".
Then touch
bobbin will stop automatically when
bobbin winding is fi nished.
Embroidery
button. Re-
again
button.
. The
to move the
(RUN/STOP). The
27