Advanced Menu - Peripheral Setup - NEC POWERMATE ES Series Service And Reference Manual

Menu Item
Onboard AC'97
Audio
Onboard AC'97
Modem
Onboard LAN
Onboard Serial
Port A
Onboard Serial
Port B
Serial Port B Mode
IR Duplex Mode
Onboard Parallel
Port
Parallel Port Mode
EPP Version
Parallel Port IRQ
Parallel Port DMA
Channel
Keyboard/Mouse
Power On Function
2-16 System Configuration

Advanced Menu - Peripheral Setup

Settings (default is bold)
Enabled, Disabled
The Enabled setting allows use of onboard sound.
Enabled, Disabled
Onboard modem not available.
Enabled, Disabled
Select Enabled to allow use of onboard local area network
3F8/COM1, Auto, Disabled, 2F8/COM2, 3E8/COM3, 2E8/COM4
Defines serial port A base I/O address.
3F8/COM1, Auto, Disabled, 2F8/COM2, 3E8/COM3, 2E8/COM4
Defines serial port B base I/O address.
Normal, 1.6us, 3/16 baud, ASKIR
Select Normal to set the port for normal use.
Half Duplex, Full Duplex
This option allows the Infra red Duplex mode to function in one
direction at a time (Half Duplex) or both directions (Full Duplex).
378, Auto, Disabled, 278, 3BC
Select Auto to allow the BIOS to automatically assign the parallel port
to an available parallel port IRQ.
ECP, Normal, Bi-Directional, EPP
Use this mode to choose the operating mode of the onboard parallel
port.
N/A, 1.9, 1.7
Use this setting (1.7 or 1.9) to select the EPP version.
7, 5
Allows setting of the interrupt request (IRQ) for the parallel port.
0, 1, 3
Allows you to choose DMA channel for the onboard parallel port in
ECP mode. Displays only when parallel port is enabled and in ECP
mode.
Disabled, Powerkey, Specific Key, Mouse Left, Mouse Right
This option, when enabled, allows system to be turned on by pressing
a specific key or moving the mouse.