Daikin ENVi User Manual page 38

Low Temp Limit
High Temp Limit
Heat Not Responding
Cool Not Responding
System Service
Auxiliary Heat Run Time
Auxiliary Outdoor
Temperature
System error, service
required
Lost communication
34
Temperature in the home is too low.
Temperature in the home is too high.
The system has failed to heat the home.
The system has failed to cool the home.
HVAC system due for regular maintenance.
Auxiliary heat source is running too often.
Your auxiliary heat has been called to run when
the outdoor temperature exceeds the pro-
grammed set point.
A system error occurred.
If the Indoor Unit's status LED is blinking after the
error has been corrected, select
lation Settings ▶
latched error status and turn off the blinking LED.
Communication with the Indoor Unit has been
lost. Check the wiring connections between the
DPCA, ENVi thermostat and Indoor Unit. The
green LED on DPCA should be on and solid.
Upon initial power up of the system communica-
tion, this alert may be generated. Wait up 10 min-
utes for system to initialized before troubleshoot-
ing. The alert will be removed automatically once
communication has been established.
Settings
Force System Off
Instal-
▶
to reset the